Donate with PayPal button New New

+ Ответить в теме
Страница 2 из 2 ПерваяПервая 1 2
Показано с 11 по 19 из 19

Тема: Do they work in Trainz 2019?

  1. #11
    Пользователь Аватар для Рома
    Регистрация
    17.10.2012
    Страна
    Адрес
    Уфа
    Возраст
    29
    Сообщений
    3,540

    По умолчанию

    well it's a ricky one. In order to speed up you need to put the main lever (Контроллер) into РП (manual start) then to ФП (fixed start) or АП (automatic start) then ФП. The very right needle shows the engine positions, you can drive on 5, 9, 13, 17, 21, 25, 29 and 33 positions for a long time, the other positions you need try to switch as quicly as possible, or else you'll burn the resisotrs. Keep the amperage below 600 A.
    Путь длиной в тысячу миль пройден на треть.

  2. #Trainz
    Реклама
    Регистрация
    Постоянная
    Адрес
    Весь мир
    Возраст
    2010
    Сообщений
    Много

    Donate with PayPal button N3v New New

     

  3. #12
    Пользователь Аватар для Japo32
    Регистрация
    21.01.2019
    Страна
    Адрес
    Madrid
    Сообщений
    11
    Автор

    По умолчанию

    Thanks a lot for your tips! it is very difficult to understand something just looking videos in a language I don't understand. Even what is every switch for. My plan, is that every locomotive that runs well in Trainz 2019 make the popup text translate in English, and I could give it to you here in the forum if you don't mind.

    What I don't know if that each locomotive has some kind of manual even in russian. I could use google to translate some parts.
    Spasibo!

    ---------- Сообщение добавлено в 16:52 ---------- Предыдущее сообщение размещено в 16:26 ----------

    Don't know. Sometimes when I put the main lever (Контроллер) into РП the amps start to rise. and then move to ФП (fixed start) so it runs correctly, but others the amps don't rise when РП position... there has to be something wrong (by my side or by the program)

    ---------- Сообщение добавлено в 17:28 ---------- Предыдущее сообщение размещено в 16:52 ----------

    In those situations that I cannot make it run the locomotive what I do is advance the power to the АП position and then suddently it start to move but very strongly... Then after stop, I can make easy and smooth starts.

  4. #13
    Заблокирован Аватар для Эльдалин
    Регистрация
    15.01.2013
    Страна
    Возраст
    28
    Сообщений
    560

    По умолчанию

    Рома, вот ты его тут учишь ездить, а вдруг это вражеский диверсант, потом приедет наши тачки угонять? Щас выпью водки, и пойду писать на тебя донос в КГБ.

    Комментарий администрации (Внимание! Ответ на этот комментарий приводит к блокировке пользователя)

    1. Фёдор Александрович:
    2. Для шуток есть соответствующая тема. За оффтоп - карточка.
    Последний раз редактировалось Фёдор Александрович; 26.01.2019 в 19:51.

  5. #14
    Пользователь Аватар для Рома
    Регистрация
    17.10.2012
    Страна
    Адрес
    Уфа
    Возраст
    29
    Сообщений
    3,540

    По умолчанию

    Цитата Сообщение от Эльдалин Посмотреть сообщение
    потом приедет наши тачки угонять?
    ВЛ - это воплощение сумрачного советского гения, никакие вражеские диверсанты ему не по-зубам

    ---------- Сообщение добавлено в 23:15 ---------- Предыдущее сообщение размещено в 23:10 ----------

    Цитата Сообщение от Japo32 Посмотреть сообщение
    Don't know. Sometimes when I put the main lever (Контроллер) into РП the amps start to rise. and then move to ФП (fixed start) so it runs correctly, but others the amps don't rise when РП position... there has to be something wrong (by my side or by the program)


    In those situations that I cannot make it run the locomotive what I do is advance the power to the АП position and then suddently it start to move but very strongly... Then after stop, I can make easy and smooth starts.
    Try to watch different youtube vids and mimic everything they do, i don't know what you do right\wrong. VL locos are the most difficult to get on with.

    Btw, this site has well-scripted diesel locos with english localisation https://store.trainzdevteam.ru/ru/diesel-locomotive
    Путь длиной в тысячу миль пройден на треть.

  6. Сказали спасибо: (3)


  7. #15
    Пользователь Аватар для Japo32
    Регистрация
    21.01.2019
    Страна
    Адрес
    Madrid
    Сообщений
    11
    Автор

    По умолчанию

    Spasibo!
    One question! I have seen the VL60K starts and runs in the default testing map without any electrification lines. So I suppose it is fake or placeholder. But for example I have been trying:
    VL82M, CS2 (that the pantograph don't go up on both, even clicking the icon), CS200 pantograph go up but don't make any sound of starting. VL10 and VL10K the same as CS200. So I don't know if they need electrification lines in the map.

  8. Сказал спасибо:


  9. #16
    Пользователь Аватар для TRam_
    Регистрация
    22.09.2009
    Возраст
    33
    Сообщений
    16,432

    По умолчанию

    Japo32, electrification lines (especially their visual appearnce) are fake for most train simulators. In some simulators there is division on full electrified/ no electrification, but Trainz never had this.
    Suppose that you haven't switched on the battarey switch.

  10. Сказал спасибо:


  11. #17
    Пользователь Аватар для Japo32
    Регистрация
    21.01.2019
    Страна
    Адрес
    Madrid
    Сообщений
    11
    Автор

    По умолчанию

    Yes.. I do everything the videos do with not the same result in the broken locomotives. These are the ones that works for me for now:

    VL60K, 2TE116 and 2TE10M. These ones they work good.
    The ones that not: VL82M, CS2, CS200, VL10, VL10K, and from the page you recently gave me, the Tep60-593 and nor the VL85-157.

  12. #18
    Пользователь Аватар для Рома
    Регистрация
    17.10.2012
    Страна
    Адрес
    Уфа
    Возраст
    29
    Сообщений
    3,540

    По умолчанию

    Цитата Сообщение от Japo32 Посмотреть сообщение
    VL82M
    This one is really complicated, not every one here can handle it

    Цитата Сообщение от Japo32 Посмотреть сообщение
    VL10 and VL10K the same as CS200
    these guys have non-default pantographs (cause they're easier to deal with in scripts) so you have to start them up correctly in ordrer to hear sounds and see the movement
    Цитата Сообщение от Japo32 Посмотреть сообщение
    So I suppose it is fake or placeholder.
    Yep, 100 phony
    Последний раз редактировалось Рома; 25.01.2019 в 23:29.
    Путь длиной в тысячу миль пройден на треть.

  13. #19
    Пользователь Аватар для Japo32
    Регистрация
    21.01.2019
    Страна
    Адрес
    Madrid
    Сообщений
    11
    Автор

    По умолчанию

    Ok, here are my testings with the locomotives in Trainz 2019. I add the video I followed to start it and make it move.

    WORKING:
    * 2TE116 Perfect https://www.youtube.com/watch?v=Okcvw411vA4
    * 2TE10M It works https://www.youtube.com/watch?v=YtFrgWFoyN8
    * 2TE10V Works but I don't make it work with 2 locomotives together. Second engine don't start. https://www.youtube.com/watch?v=C0GibArdtbU
    * CHM3 It is alreasy running so no deep programming there.
    * Tep70 It seems to work (numbers in front console are a little "raised" of the 3D geometry. https://www.youtube.com/watch?v=PEJWF9DgYdw
    * CHS4: It works but I ahve to apply lot of power to start moving. At power 2 position it doesn't move. Doesn't sound the engines as the video https://www.youtube.com/watch?v=jwBRszH9eS4
    * CHS8 y CHS7: Works but pantograph don't rise and starting engine sounds cuts off. Once is moving there is some kind of engine sound (weak) https://www.youtube.com/watch?v=BkY6nzn_HFc
    * VL65 It works but no sounds https://www.youtube.com/watch?v=sVmqhrN2Ui8
    * VL80 Perfect but where is dead man cancelation button? The left one doesn't work so I have to switch off the system.
    * VL60k Starts but I have to put big thrust to start it moving. https://www.youtube.com/watch?v=K6t30mPAlpk

    DON'T WORK (or I wasn't able to)
    * CS2 No raises Pantograph. Rear keys (AB) don't turn 45º video, but 90º; and the same with front key (BY) as the video https://www.youtube.com/watch?v=LpKadR1kkYs
    * CS200 Go up the phantograph but nothing more as the video. https://www.youtube.com/watch?v=wYzfeHI_c7E
    * VL10 No work https://www.youtube.com/watch?v=FJTxzvYl2J4
    VL10 Rise one of the pantographs but not the B one. Not startup. https://www.youtube.com/watch?v=tcCzA-STCHU
    VL10K Not startup the engine. https://www.youtube.com/watch?v=BYOq_je_VOM
    * VL82M Don't rises the pantograph and doesn't start up https://www.youtube.com/watch?v=_XYcLTEq5sE

    From TrainDevStore. VL85 and Tep60 doesn't work neither.

    Spasibo!

    ---------- Сообщение добавлено 27.01.2019 в 13:53 ---------- Предыдущее сообщение размещено 26.01.2019 в 18:34 ----------

    Another issue I see in the locos is that lot of them don't show shadows inside the cabin. In a few, if you open the window, they appear, but not all of them fix that.

+ Ответить в теме
Страница 2 из 2 ПерваяПервая 1 2

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения